Programming instructions

M
Meet-Me Answer Page
Any user can dial a code in response to an all-call or zone page and be connected to the paging
party in a private conversation.
Messaging
Turning on a telephone lamp to let the user know that a message awaits pickup and leaving a
message on the display of a telephone that gives information on your status.
Mute
Afixed feature button that keeps a distant party from hearing your conversation. This button also
lets you adjust the telephone display contrast from light to dark.
N
Night Transfer
Transferring incoming calls to a particular station(s) for off-hour answering.
O
Operator Station
Also known as the attendant station, this system station is programmed to ring when users dial
the operator; usually considered the central message desk of the system although multiple
attendant stations are possible
P
Paging
This feature allows station users to dial-up customer provided loudspeaker paging equipment
and page over externally placed loudspeakers and determines what paging zones, if any, a station
can page over.
Prime Line
Alinedesignated to a particular telephone and automaticallyselected whenthe handset is lifted.
Privacy
Line feature, assigned by the programmer, to allow only one station to access a line at any time;
no other station has access to the line unless the user makes it available through conferencing.
Programmable Buttons Each telephone or station has buttons that can be user-programmed for
autodialing numbers or feature codes, or other special purpose dialing requirements.
Pulse/Tone Switching
Changing from pulse/rotary dial signals to tone/DTMF signals.
Attendant Manual - DSU II Digital Expandable System 115
GCA70-245 Glossary