Specifications

3.4.11 System Speed Dial
Description: The system speed dial is a system-wide list of numbers that all users can access for
automatic dialing. Those users with two-line display LCD speakerphones can scroll
through the list of names that you assign to the system speed dial numbers using their
speakerphone’s display. After scrolling through the list, they can pick the name they wish
to call, and automatically dial the number assigned to the name. The system scrolls this
index of names in the sequence that you or the attendant sotred the entries; therefore, be
sure to arrange the entries in a sequence that best meets the system user’s needs.
To Program: 1. Dial 02. “SYS SPEED DIAL”
2. Dial 01–99 for storage location. “XXXXXXXX...”
3. Dial # to clear current entry. “LINE: ”
4. Choose line, line group, or intercom
to be used with speed dial number. “LINE XX ”
—Line port 1–14 = Dial 01–14 or press A1–A14.
—Line port 15, 16 = Dial 15, 16 or press B1, B2.
—Line port 17–24 = Dial 17–24 or press HOLD, A1–A8.
—Dial 90 for last line used or prime line. “PRIME LINE”
—Dial 91–94 for line group 1–4. “LINE GROUP 1”
—Press ITCM button for intercom line. “XXXXX...”
5. Dial number for storage (32 digits max).
—If required, press HOLD button to store a pause.
—If required, press TAP button to store a hookflash.
6. Press T/C button to program name.
7. Enter digits from character chart on the next page to spell name (up to 16 characters).
—OR—
Press T/C button to leave name blank.
8. Press T/C button to save the number and name.
9. Repeat steps 2–9 for all speed dial numbers.
—OR—
Press ✳ for configuration mode.
Digital Telephone System IMI66–107
3 – 28 System Programming