User guide

Activate

Pair Your Remote

The pairing process connects your remote to the adaptor box so that the adaptor box—and Skype on

XFINITY—can only be controlled by one remote.

1. Pull out the tab from the remote’s battery compartment.

2. Press and hold the Setup button on your remote until the red light on your remote turns green.

3. Press the Call button on your remote.

4. Flip the remote to the keyboard side.

5. Use the keyboard to enter the 3 letters displayed on your TV screen. Note: The letters on your

screen may differ from the example shown here.

Helpful Hints for Remote Pairing

• Youonlyhave60secondstopressthelettersonyourremotethatcorrespondtolettersonyour

screen.Ifyoudonotnishthiswithin60seconds,simplyrestarttheprocess.

• Ifyourremoteisnotworking,refertotheHelpful Hints for the Remote section on page 9.

• Ifyouenteranincorrectletterduringthepairingprocess,thescreenwillrefreshandyouwillbe

asked to retry.