User guide

16
Setup
Thestepsbelowmaydifferslightlydependingonyourmediasetup,buttheequipmentordershould
remainthesame(see the illustration on following page).
A.PlugintheprovidedHDMIcabletoyourset-topboxandtheotherendtotheHDMI Cable Inporton
youradaptorbox.
B.PlugasecondHDMIcabletotheHDMI TV Out portonyouradaptorboxandtheotherendtooneof
theavailableHDMIportsonyourTV.
 •Note:Ifyouhaveanaudioreceiver,useoneHDMIcabletoconnectyourset-topboxtoyourreceiver
 thenuseanotherHDMIcabletoconnectthereceivertoyouradapterbox(see the illustration on
following page).
C.PlugthecameracableintotheCameraport.Ifthecameracableisnotlongenoughtoreachthe
Cameraport,connecttheUSBextensioncabletothecameracable.
D.DecideifyouwanttoconnecttoyourhomenetworkusingawiredEthernetcableor
 wirelessconnection.

• Ethernetconnection:PlugaCAT-6Ethernetcable(notprovided)totheEthernetportonyour
adaptorboxandtheotherendtoanavailableportonyourmodemorrouter.
 • Wirelessconnection:SkipthisstepandfollowtheinstructionswhenyouactivateonyourTV.
E.IfyouareusinganaudioreceiverwithanSPDIF(OpticalDigitalAudio)cable,disconnectthiscable
 fromyourset-topboxandplugitintotheAudioportontheadaptorbox.SinceSPDIFonlytransmits
 audio,youwillalsohavetoconnectviaHDMIinordertoseeanyvideo.Westronglyrecommendusing
 bothHDMIandSPDIFcables(as depicted in the illustration) toconnectyouradaptorbox.
F. Connectthepoweradaptortothepoweradaptorcable(see the illustration on following page).
G.UsingyourTVremote,selectthesameHDMIinputtowhichyouconnectedtheadaptorbox.