Polyester

8
 MODULAR KNBOX IN THERMOPLASTIC
small to medium sizes
sizes 75x125x35 mm to 175X250X150 mm
The modular KNBOX is a series of small to medium sized general purpose en-
closures made from thermoplastic: Polycarbonate or ABS
The enclosures are produced in standard RAL 7035 with the lids available in
both grey or transparent options.
The polycarbonate enclosures are available with prepressed knock-outs, Pg or
metric.
The enclosures are also available with plain sides in ABS and with plain sides in
polycarbonate for individual machining of holes.
The base of this enclosure is equipped with unique slots for printed circuit
boards.
Available accessories include: mounting plates, DIN rails, hinges and f a s -
tening lugs.
 MODULAR KNBOX IN THERMOPLASTIC
medium to large size
sizes 200x200x132 mm to 400X600X185 mm
The medium to large size KNBOX can be supplied with knock-outs or with plain sides.
Standard colour is grey RAL 7035, grey or transparant lid options available.
All enclosures are available with depth alternatives 130mm and 185mm.
All 130mm deep standard enclosures include base, lid, cover, screws and
mounting screws.
All 185mm deep standard enclosures include base, extension frame, lid, cover,
crews, mounting screws and extension frame screws.
Special features of the series makes it possible to mount the lid onto the side,
through which plates and panels can be mounted at any heigth.
There is a wide range of accessories available. These include: mounting plates,
DIN rails, modular covers, corner elevators and fastening lugs.
 TECHNICAL FEATURES
Polycarbonate ABS
Degree of protection EN60529 IP66/67 IP66/67
Colour RAL7035 RAL7035
Impact resistance
EN 62262 (+35°C/ -25°C)
IK08/IK08 IK07/IK06
Operating temperature -50 °C up to +100 °C -40 °C up to +60 °C
Flammability UL746C 5V/- not tested
Transparent lid polycarbonate polycarbonate
Cover gasket PUR(polyurethane) PUR(polyurethane)
Cover screws polyamide polyamide
Halogen free yes yes
Certifi cates FI/GL/UL/cUL/GOST FI/GL/GOST