Specifications

40
You have now gone through the Spectrum Module. If your customer wants to also see
Photometrics, continue to Step 10. For Quantitation, skip to Step 11 If your customer is more
interested in Kinetics, skip to Step 12.
10. Photometrics
The Photometrics/Quantitation module is very flexible and easy to use. This procedure will take
you through setting up a general photometrics table.
A. Data Collection Method
1. Select [Edit] > [Method] and click on the [Wavelengths] tab. In the Wavelength(nm)
box, enter the appropriate wavelength and click [Add]. Repeat this step for as many
wavelengths as you wish to acquire data for.
2. Click on the [Calibration] tab. Select [Raw Data] in the Type box.
3. Review other tabs for appropriate settings and click [Close]
B. Read the Samples
Click anywhere in the Sample table to activate it. Enter the appropriate sample names.
Place the first standard into the sample compartment. Click the [Read Std.] Button.
11. Quantitation
The Photometrics/Quantitation module is very flexible and easy to use. This procedure will take
you through setting up a general quant curve and running unknowns against it.
A. Data Collection Method
1. Select [Edit] > [Method] and click on the [Wavelengths] tab. In the Wavelength(nm)
box, enter the appropriate wavelength (i.e. 224) and click [Add].