Owner's Manual

4HighChairInstructionManual
CombiUSA.com
6. Pull bottom portion of seat pad
over middle post.
4. Route the waist belt portion of the harness into the
slots at the rear of the high chair. Repeat on the
opposite side of seat.
5. Route the crotch belt portion of the harness into the
slot behind the middle post.
7. Attach the two snaps on each side
of the seat pad as shown.
8. Attach the hook and loop to the
post of the footrest.
1. Unfold the main body of the high chair
by pushing down on the rear leg
assembly until it locks into position.
2. Adjust the height of the main body
of the high chair by squeezing the
height adjustment buttons on both
sides of main body while pulling up on
the seating portion. Adjust the seating
portion to the highest position for
ease of assembly.
3. Insert the backrest into the seating
portion of the high chair until you hear
an audible “click”. Ensure that the
backrest is properly attached to the
seating portion of the high chair by
pulling up on the backrest.
HIGH CHAIR ASSEMBLY
WARNING: The backrest MUST
be properly attached to the seating
portion of the high chair before use.