Owner's Manual

68
Vehicle seat belts with locking latch plates
(fig. j) normally hold a car seat tightly.
However in some cases, the locking latch
plate on some seat belts may slip and loosen
after being buckled on car seat if positioned at
a certain angle. If this happens, flip the latch
plate over and re-buckle. Test installation again
to see if this works. If not, move car seat to
another seating location.
Combination Lap/Shoulder Belt with Locking Latch Plate
(fig. j)
Flip
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:25 PM Page 69