Owner's Manual

6. Pull harness adjuster strap located at front of seat to tighten the
harness. Verify proper operation, tightening, and that belts are not
twisted.
7. Replace harness shield on back of car seat
(fig. v).
- Slide tabs on sides of harness cover
into slots in back of car seat.
Reassembly of shoulder harness straps and harness
cover is now complete.
60
(fig. v)
Harness
Cover
• Shoulder harness cover MUST be placed over
harness straps and properly secured at both sides.
• To prevent loose harness and risk of ejection,
shoulder harness cover MUST be in place during use.
WARNING - DEATHor SERIOUS INJURY can occur
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 61