Owner's Manual

Removal Of Car Seat Installed With Vehicle Seat Belt:
Tip tether strap adjuster to loosen tether strap (fig. k).
Depress retainer spring and unhook tether
hook from vehicle tether anchor (fig. l).
Unbuckle vehicle seat belt.
- Pressing down in center of car seat to reduce
tension on vehicle seat belt will make it easier
to unbuckle vehicle seat belt.
For lap and shoulder belt installation, open
belt lock-off and remove vehicle shoulder belt.
Storage Of LowerAnchor Belt
And Connectors:
When not using the LATCH System, store
the lower anchor belt and push-on connectors
by removing lower anchor belt and connectors
from forward-facing belt path and store in
pocket on right side of car seat underneath
seat pad (fig. m).
Top Tether Storage:
Store top tether in pocket on
back of seat pad when not
in use (fig. n).
1
2
3
(fig. k)
Belt
Adjuster
(fig. l)
Retainer
Spring
Tether
Hook
1
2
1
2
4
45
(fig. n)
Storage
Pocket
(fig. m)
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 46