Owner's Manual

39
Check for secure installation. Gripping car seat at
the belt path, pull car seat front to back and left
to right to check for secure installation (fig. l).
LATCH belt MUST stay tight.
If LATCH belt does not stay tight or car seat
cannot be securely installed:
1. Try a different LATCH equipped seating position.
2. Try installing using the vehicle seat belt. See
“Forward-facing Installation With Vehicle Seat
Belt” section.
3. Do not use this car seat.
Re-snap and re-hook pad cover onto car seat.
Removal Of Car Seat Installed With LATCH:
Tip tether strap adjuster to loosen tether
strap (fig. m).
Depress retainer spring and unhook tether
hook from vehicle tether anchor (fig. n).
Loosen lower anchor belt by pressing
adjuster button and pulling out lower
anchor belt.
- Pressing down in center of
car seat to reduce tension on
lower anchor belt will make it
easier to loosen lower anchor belt.
14
(fig. l)
1
2
3
(fig. m)
Belt
Adjuster
(fig. n)
Retainer
Spring
Tether
Hook
1
2
1
2
15
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 40