Owner's Manual

Route the lower anchor belt through the
forward-facing belt path identified by red
“Belt Here” arrows.
- Check that LATCH belts are not
wrapped around shoulder harness
or harness adjuster strap.
- Lengthen lower anchor belt by
pressing adjuster release button
while pulling belt to extend the
length of lower anchor belt (fig. d).
- With LATCH connector slot on the
bottom and red release button
toward front of car seat, route
lower anchor belt through
the forward-facing belt path in
back of car seat. Pull through
to opposite side.
- Position the lower anchor belt
in the forward-facing belt path
by placing the lower anchor
belt between raised ribs
in forward-facing belt path
identified by the red “Belt
Here” arrows (fig. e).
5
(fig. d)
36
BELT
HERE
Lap
Beltor
LATCH
Here
Forward-facing
Belt Path
(fig. e)
Lap
Beltor
LATCH
Here
Lower
Anchor
Belt
Adjuster
Release
Button
Pull
Slot
Red
Release
Button
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 37