Owner's Manual

Refer to vehicle owner’s manual to identify the seating locations which
can be used with a car seat. Check for specific instructions for car seat use.
After selecting a seating location, if vehicle seat back is adjustable, adjust
seat back into most upright position or position specified in vehicle owner’s
manual.
Store tether in storage pocket in pocket at top of seat back and store
LATCH lower anchor belt in pocket on side of seat. See “Installation with
LATCH” section.
Place car seat rear-facing in the vehicle seat
location selected with rear-facing belt path
toward vehicle seat back (fig. a).
Adjust recline of car seat.
- To properly recline seat
back, position car seat
so reference line is
horizontal (fig. b).
1
2
3
(fig. a)
BELT
HERE
Rear-facing
Belt Path
4
5
BELT
HERE
(fig. b)
Recline
Reference Line
29
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 30