Owner's Manual

24
Place car seat rear-facing in the vehicle
seat location selected with rear-facing
belt path toward vehicle seat back and
centered between the vehicle lower
anchors (fig. e).
Connect lower anchor connectors to
vehicle lower anchors.
- Position red release button of
Push-On Connector facing away from
car seat and wording on back side
of connector facing car seat. If
connector is not in this position,
turn connector over.
- Position the slot of the Push-On
Connector onto the vehicle anchorage.
Push connector in to lock onto the vehicle
anchorage (fig. f). You should hear a click.
- Pull on connector to be sure it is locked onto
the anchorage .
- Repeat for connector on opposite side.
Tighten lower anchor belt to secure the car seat.
- Press down in center
of car seat to depress
the vehicle cushion
and pull free end of
lower anchor belt to
tighten belt (fig. g).
Adjust recline of car seat.
- To properly recline
seat back, position
car seat so reference
line is horizontal (fig. h).
7
6
8
BELT
HERE
BELT
HERE
Rear-facing
Belt Path
(fig. e)
BELT
HERE
1
(fig. f)
BELT
HERE
BEL
T
HERE
(fig. g)
1
2
2
BELT
HERE
(fig. h)
Recline
Reference
Line
5
Slot
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 25