Owner's Manual

COMBI International Corporation • 199 Easy St. • Carol Stream, IL 60188 • www.combi-intl.com
Customer Service 1-800-992-6624 • 10:00 a.m. - 5:00 p.m. Central Time • Monday - Friday
- 2 -
Assembling the Main Frame
1. Place the Deluxe Activity Rocker™ on the floor.
Kneel down behind the seat. (A)
2. You must reset and balance the armrest reclining
position slot guides before proceeding.
To balance the slots guides:
Squeeze the reclining lever (B) located behind the
seat and push the seat forward to full upright
position. Then release the reclining lever to lock
the seat into position. Check to make sure the
armrest slot guides are in the same forward locked
position. (C)
3. To connect the leg (D) to the frame, grasp the top
of the leg with one hand and the frame (next to the
armrest) with the other hand. (E)
4. Insert the leg into the opening of the frame tube
until you hear a click and the lock pin can be seen
through the hole in the armrest
5. Be sure that the seat cushion’s metal hooks
(located above and below the armrest) go over the
frame and snap under the seat cushion.
6. To make sure that the Deluxe Activity Rocker™ is
ready for use, place one hand behind the top of
the seat cushion and push up until the folding lever
(F) slides completely forward into place.
Attaching the Canopy
Attaching the Canopy
To install the canopy place the notch in the clamp of the canopy holder into the
hole on the reclining tube. (Located above the armrest).
Note:
Clamp must be positioned behind the canopy holder in order to insert into the frame.
Armrest
Front leg
Canopy
Holder
Clamp
Reclining Tube
Armrest reclining
slot guide.
Armrest reclining
position slot guides.
Kneel behind
the seat to
reset and
balance the
armrest
reclinging
guides.
Note: Both armrest slot
guides must be locked in
the forward position
before connecting the leg
to the frame tube.
Recline
release
lever
located
behind the
seat.
(A)
(B)
(D)
(E)
(C)
Frame
Tube
(F)
Lock Pin