User's Manual

INSTALLATION GUIDE FOR RX78V2F-B-AC
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 21
3.4 EQUIPMENT CONNECTORS
3.4.1 PS BDA CONNECTORS
The PS BDA is designed for all cable entries from the right or left of the enclosure, as shown in the following
figure.
Figure 6: Equipment Connectors
Table 1: Equipment Connectors
Identifier
Descriptions
Knock Out
3/4’’: For Hybrid cable (include AC cable and monitor cable from BBU)
1’’: Reserved.
1/2’’: For Dry contactors or External alarm cables
DT Test
SMA connector for DT port test, -28dB coupling to DT port, available for both downlink and uplink test.
MT Test
SMA connector for MT port test, -28dB coupling to MT port, available for both downlink and uplink test.
*: the antenna is not provided by Comba, the connector type of the system for the antenna is N-Female.
DT
N-Female connector for connection to donor antenna.
MT
N-Female connector for connection to service antenna.
OMT
RJ45 Connector for local WEB GUI connection.
LAN
RJ45 Connector for internet connection.
UL/DL
Reserved for DAS system