User's Manual

INSTALLATION GUIDE FOR RX78V2F-B-AC
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 20
3.3.4 WALL MOUNTING
⚫ Drill four holes on the wall using the position of four holes on the mounting rack as a guide. Fix the
mounting rack to the wall using four masonry bolts (M10x110mm).
⚫ Install the Mounting Rack to the wall.
⚫ Hang the equipment and secure the enclosure to the mounting rack.
Figure 5: PS BDA Wall Mounting
3.3.5 DRIP-LOOP
Comba recommends that every horizontal cable entry to the equipment forms a 'U' before its entry to the
equipment. Water on the cable will drip down at the bottom of the loop and will not accumulate at the equipment
connectors.