User's Manual

INSTALLATION GUIDE FOR RX78V2F-A-AC

ENU STATUS : 1-0-0

Page 9

0.5 SAFETY NOTICES AND ADMONISHMENTS

This document contains safety notices in accordance with appropriate standards. In the interests of conformity

with the territory standards for the country concerned, the equivalent territorial admonishments are also shown.

Any installation, adjustment, maintenance and repair of the equipment must only be carried out by trained,

authorized personnel. At all times, personnel must comply with any safety notices and instructions.

Specific hazards are indicated by symbol labels on or near the affected parts of the equipment. The labels

conform to international standards, are triangular in shape, and are colored black on a yellow background. An

informative text label may accompany the symbol label.

Hazard labeling is supplemented by safety notices in the appropriate equipment manual. These notices contain

additional information on the nature of the hazard and may also specify precautions.

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party

responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

For compliance with the general population RF exposure limits, each individual antenna used for this

transmitter must be installed to provide a separation distance during normal operation and must not be co-

located with any other antenna for meeting RF exposure requirements.

Warning Notices:

These draw the attention of personnel to hazards that may cause death or injury to the operator or others.

Examples of use are cases of high voltage, laser emission, toxic substances, point of high temperature, etc.

WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and

QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to

operate this device. The PS BDA can be configured as Class A or Class B Signal Booster. You MUST

www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture

penalties, including penalties in excess of $100,000 for each continuing violation.

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party

responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

Alert:

These draw the attention of personnel to hazards that may cause damage to the equipment. An example of

use is the case of static electricity hazard.

Caution notices may also be used in the handbook to draw attention to matters that do not constitute a risk of

causing damage to the equipment but where there is a possibility of seriously impairing its performance, e.g.

by mishandling or gross maladjustment. Warnings and Cautions within the main text do not incorporate labels

and may be in shortened form.

Disconnection of the 2 RF connectors may cause damage to the equipment when power is on.

Class A:

The above all, when the Maximum antenna gain is 3dBi for downlink and the shortest distance from the

human specific is 0.88m, the device is compliant with the requirement MPE limit for uncontrolled exposure.

WARNING!

Use only authorized and approved antennas, cables and/or coupling devices! The use of unapproved

antennas,

cables or coupling devices could cause damage and may be of violation of FCC regulations. The use of