User's Manual

INSTALLATION GUIDE FOR RX78V2F-A-AC
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 11
1 GENERAL INFORMATION
The RX78V2F-A-AC is a new digital dual band public safety repeater (hereafter referred to as PS BDA)
designed to protect the lives of first responders and building occupants. Through the use of digital filtering
technology, the RX78V2F-A-AC helps eliminate adjacent channel interference to allow band selectivity and
support 700MHz and 800MHz rebanding. Up to two non-contiguous frequency bands can be simultaneously
supported in each of the 700MHz and 800MHz Public Safety frequencies via a web-based GUI, which provides
versatility and total control to the user.
Main Features
• Digital/programmable utilizing FPGA
• Supports public safety 700/800MHz
• Supports P25 P1/P2 digital and conventional analogy communications simultaneously
• Single band versions include license to switch from original band to alternate band
• Shared channels (UL sharing 96C, DL 64C+64C)
• 2W downlink output power for each band
• Channelized Auto Gain Control (AGC) / Channelized uplink squelch
• Built-in mandatory isolation test to prevent BDA oscillation
• Power Charge interface
• Auto shutdown with alarm upon oscillation detection
• Web based GUI for intelligent configuration
• NFPA compliant dry contact alarms, NEMA 4X enclosure
The following figure shows the enclosure of the PS BDA.
Figure 1: Front, Side and Bottom Views of the PS BDA Enclosure