User's Manual

MIRCU User Manual
© Comba Telecom Ltd. All Rights Reserved Page 6 of 24
RET PROT1 PORT2
CB01CB20C1234567-Y1 Read & Write No Access
CB02CB20C1234567-Y2 Read & Write No Access
CB03CB20C1234567-Y3 Read & Write No Access
CB04CB20C1234567-Y4 Read & Write No Access
CB05CB20C1234567-R1 No Access Read & Write
CB06CB20C1234567-R2 No Access Read & Write
CB07CB20C1234567-R3 No Access Read & Write
CB08CB20C1234567-R4 No Access Read & Write
When the AISG2.0 base station is connected, port 1 can scan to CB01CB20C1234567-Y1,
CB02CB20C1234567-Y2, CB03CB20C1234567-Y3, CB04CB20C1234567-Y4, 4 devices.
Port 2 can scan to CB05CB20C1234567-R1, CB06CB20C1234567-R2,
CB07CB20C1234567-R3, CB08CB20C1234567-R4, 4 devices.
The device serial numbers that can be read by the AISG3.0 base station by scanning the
MIRCU-S24 module are as below:
5.3.1 Operation in AISG2.0 Mode
A summary of operation conflict for 2 primaries (1
st
& 2
nd
Primary) operating MIRCU-S24 is
shown in table below:
**Note: All “√” and “X” shown are mainly in connection to the 2
nd
primary, which implies
whether or not the corresponding action (listed horizontally in table) can be performed on
the 2
nd
primary when the 1
st
primary is executing a certain command or action (listed
vertically in table). The order of priority of the “primary” is not fix and it is depending on which
primary actually starts an action 1
st
.