User's Manual

MIRCU User Manual

Figure 10

c) Control cables metal sheath attach to grounding kit as shown in Figure 11.

Figure 11

6.4.2 Grounding Kit Installation Procedure

a) Prepare ground kit, as shown in Figure 12 1a.

b) Clean the plastic sheath of the control cables, cutting plastic sheath with a suitable

stripper tool, expose metal braid sheath of control cable, with length about 22mm, as

shown in the Figure 12 1b.

c) Remove the protection sheet on the ground kit, clamping the grounding kit around the

control cable, and align with striped line as shown in Figure 13

Control Cable

Grounding Kit

Grounding Cable

Connect to grounding bar