User's Manual

MIRCU User Manual
© Comba Telecom Ltd. All Rights Reserved Page 16 of 24
6.1.3 Installation Tools
32mm open-end Torque wrench x 1.
6.2 MIRCU-S24 Installation
6.2.1 MIRCU-S24 Installation Steps and Methods
a) As shown in Figure 2, "AISG OUT" logo on Antenna cover need to be aligned with
MIRCU “IN” and “OUT”, then insert MIRCU into antenna mounting slot.
Figure 2 MIRCU Alignment
b) As shown in Figure 3, tighten screws on MIRCU using a slotted type screwdriver.