User's Manual

MIRCU User Manual
© Comba Telecom Ltd. All Rights Reserved Page 13 of 24
MIRCU-S24 does NOT support 2 primaries to set tilt simultaneously. When 1
st
primary
is setting tilt, the 2
nd
primary is able to scan, reset port, reset ALD but NOT able to
calibrate, set tilt, upload/download file, configure MALD and ping.
When 1
st
primary is setting tilt, if 2
nd
primary send command to MIRCU, the impact on
the 1
st
primary is shown in table below:
2
nd
Primary Action If MIRCU Support Impact on 1
st
Primary
Scan Support No Impact
Calibration Return “UseByAnotherPort” No Impact
Set Tilt Return “UseByAnotherPort” No Impact
ResetPort Support No Impact
ResetALD Support Broken Link
Upload File Return “UseByAnotherPort” No Impact
Download File Return “UseByAnotherPort” No Impact
MALD Configure Return “UseByAnotherPort” No Impact
PING Return “UseByAnotherPort” No Impact
d) Reset
AISG3.0 has 2 kind of reset operations: ResetPort and ResetALD. ResetPort only
resets the pair of port connecting to the 1
st
OR 2
nd
primary and does NOT affect the
operation of another primary. ResetALD resets the whole module and it will restart,
both primaries will hence be disconnected.
e) Upload (Fetch File from Module)
The upload command starts with ‘UploadStart’ and ends with ‘UploadEnd’. The file is
carried and uploaded by using ‘UploadFile’ command. The supported file types are
FirmwareFile and ConfigureFile. The module does not support multi-ports file upload
operation simultaneously, which mean when 1
st
primary is performing upload, the 2
nd
primary will be in ‘Restricted Connection State’.
When 1
st
primary is uploading file, if 2
nd
primary send command to MIRCU, the impact
on the 1
st
primary is shown in table below:
2
nd
Primary Action If MIRCU Support Impact on 1
st
Primary
Scan Support No Impact
Calibration Return “IncorrectState” No Impact
Set Tilt Return “IncorrectState” No Impact
ResetPort Support No Impact
ResetALD Support Broken Link
Upload File Return “IncorrectState” No Impact
Download File Return “IncorrectState” No Impact
MALD Configure Return “IncorrectState” No Impact
PING Return “IncorrectState” No Impact
f) Download (Download file to Module)