User's Manual

Page 12 of 25
5.0 IRCU Installation and Connection
5.1 Installation Requirements
5.1.1 Control Cable Requirements
Control Cable connector:
Meet the requirements of IEC60130-9 8-pin connector. End of cable are composition of
Male and Female Connectors, connector and cable core meet the AISG interface standard
requirements.
Cable:
Composition of 5 core with metal and plastic protective layer shielding cable, core diameter
requirements: 3 × 0.75mm + 2 × 0.32mm.
Protection class:
IP65.
5.1.2 Power Supply
IRCU Input Power: DC +10 V ~ +30 V
5.1.3 Installation Tools
32mm open-end Torque wrench x 1.
5.2 IRCU Installation
5.2.1 IRCU-302, IRCU-502, IRCU-602 installation steps and methods
a) As shown in Figure 3-1, "AISG OUT" logo on Antenna cover need to align with IRCU “IN”
and “OUT”, then insert IRCU into antenna mounting slot.
Figure 3-1 IRCU Installation