User's Manual

INSTALLATION GUIDE FOR RX-7W22
ENU STATUS : 1-0-2
Copyright - refer to title page
Page 14
5 WEB GUI
The AMS can be monitored and controlled via the WEB GUI; use the following guide to finish system parameter
setting and commissioning.
5.1 WEB GUI CONNECTION
Step 1: Connect the ETH port to the PC RJ45 port to set up a physical connection.
Step 2: Manually change the IP address of the PC to be 192.168.1.100/255.255.255.0
Step 3: Open a browser (Chrome or Firefox), connect 127.0.0.1:8080/web_Antenna for login
5.2 WEB GUI INTRODUCTION
5.2.1 [TAG MANAGEMENT]
Figure 4: Tag Management
For all the new systems, need to add tags into the controller
• ID – The Serial Number for the RFID tag
• Taginfo – The other information for the RFID/Antenna, such as the location information