User's Manual

USER MANUAL FOR RX-8139
ENU STATUS : 1-0-0 Copyright - refer to title page Page 14
3.3 INSTALLATION PROCEDURES
3.3.1 GOODS INWARDS INSPECTION
z Verify the number of packages received against the packing list.
z Check all packages for external damage; report any external damage to the shipping courier. If there
is damage, a shipping agent should be present before unpacking and inspecting the contents
because damage caused during transit is the responsibility of the agent.
z Open and check each package against the packing list. If any items are missing, please contact
Comba.
z Do not remove items from antistatic packing until ready for installation. If damage is discovered at the
time of installation, contact the shipping agent.
3.3.2 TOOLS
See Appendix A for a full list of the recommended tools required for installation and maintenance.
3.3.3 PREPARATION
z Wall mounting with the masonry bolts supplied, which make use of the outer holes.
z Pole Mounting with the clamp kit supplied, which make use of the inner holes.
236
186
200
Figure 3: Mounting Rack Overview