User Manual

INSTALLATION GUIDE FOR RX7W22
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 34
 Click to continue. If isolation detection success, the process will go to RF Settiing
Screen shown as Figure 55. If failed, a Tips window will pop-up shown as Figure 54, users
need to check whether the system isolation is very weak.
NOTE: At the end of first frequency band commissioning, user can start other frequency band commission.
Figure 33: Commissioning Procedure – Isolation Detective
Figure 34: Commissioning Procedure – Isolation Detective Confirm
Figure 35: Commissioning Procedure –Isolation Detection Failed