User's Manual

RS- 5180CDMA800/1900 Dual Band Indoor Fiber Optic
Repeater
Comba Telecom
Edition
2.0
Date
2001-06 17 of 31
Installation of Portable Frame
Well-assembled portable frame can be installed vertically on the ground. Portable frame can
be installed in three ways:
 A  Vertically fixed on the ground; B Vertically fixed on the wall support;
 C Vertically fixed on table.
 A Installed on the ground:
(1) C hoose the appropriate position indoors. Place the portal frame
vertically on the ground. Mark down the points of four φ13 holes.
(2) Drill 4 holes with electric impact drill and embed four φ 10x8 0mm
expansion screws.
(3) Lift the portal frame. Place it vertically on the ground through the 4
holes. Sleeve on flat gasket and spring washer. Tighten screw nut.
Portal frame is installed well (figure 3.1-4).
Figure 4 Master Unit Installation Schematic Diagram (A)