User's Manual

RS- 5180CDMA800/1900 Dual Band Indoor Fiber Optic
Repeater
Comba Telecom
Edition
2.0
Date
2001-06 14 of 31
separately in boxes. The “portable rack” for installation of master unit cabinet
(standard 19" portable frame

800mm high) is put after disassembled. Therefore,
before install master unit, first assemble portable rack.
Assembly of Portable Rack
It is quite simple to assemble portable rack as shown in figure 3.1-1. The followings should
be noted:
(1) For the convenience of installation, all the assembly holes on all the
components have sufficient room. Hence, in fixing the last two columns,
ensure to keep the distance between them as long as possible for the
placing of master unit’s cabinet.
(2) Both of the two columns have front and rear sides as well as upper and
lower sides.. There is ground copper slip or many holes on the back side.
The upper end has a hole and the lower end has two holes. The front
side has the trademark of Comba on the upper beam.
(3) All components are steel made and heavy. Pay attention to safety in
assembly and prevent any injury.