User Manual
Table Of Contents
- RF500 LITE System Components
- Safety Information
- RF500 LITE Wireless Monitoring System Overview
- Equipment Installation
- Powering On and Off
- Gateway Commissioning
- Gateway Programming and Use
- Gateway Specification – RF500 LITE
- Transmitters Specification – RF512, RF513 and RF516
- Changing Lithium Battery on RF512 Series Transmitters
- Pinout and Wiring
- FCC Approvals
- Equipment Ratings
- Maintenance and Cleaning
- Declaration of Conformity
- Transmitter Error Codes
- Gateway Fault Conditions
- Definitions of Gateway Terminology
- Glossary
- Document Revision History
Transmitter Error Codes
Under certain conditions the transmitter display can show an error. These errors can help in
diagnosing the reason a transmitter may fail to transmit data to the Gateway.
This is not an exhaustive list of errors only the most common will be described here.
Error Meaning Resolution
004 Fault with Radio Module Try removing the battery then replacing it
100 Date and time lost
Wait for the transmitter to receive correct date
and time from the Gateway
400 Invalid Programmed Task Program a new task from the Gateway
500 Errors 100 & 400 combined Resolve Error 100 & Error 400 individually
Gateway Fault Conditions
Under certain conditions the Gateway Fault LED can flash to indicate an error. The possible
faults which can cause the Fault LED to flash are:
• Overheating
• Clock error
• Clock Battery error
• Software errors
• Radio Module fault