User Manual

Gateway Clock Setup
Click Administration button then the Set Clock button.
Enter the current date and time using a 4-digit year. Enter your password and click the Submit
button. The Gateway will automatically reset after this step.
Network Setup
Click Administration button then the Setup Network button.
Network Details
Usually the IT Department will allocate a static IP address and subnet mask for the Gateway.
Enter these using dotted decimal notation into their respective fields. If access from different
subnets is required also enter the Network Gateway IP address. Users who implement MAC
address access security will find the MAC address of the LAN interface displayed in this
screen.
Static IP Address The IP address which has been allocated to the Gateway. E.g.
192.168.25.220
Net mask The subnet mask associated with the above IP address. E.g.
255.255.255.0
Default Gateway The IP address of the network gateway to allow access by users on
a different subnet (optional)
Mail Server IP Address The IP address of your internal mail server (optional)
SMS Details
The Gateway supports SMS alerts via a third party “Email to SMS” conversion service.
Comark have tested the TextMagic “Email to SMS service” www.textmagic.co.uk. To enable
SMS alert emails to be sent, subscribe to the TextMagic service and enter your email address
into the following field:
Account Name The email address used as the account name for TextMagic
To save changes enter your Gateway password and click the Save button. The Gateway may
automatically reset after this step.
Depending on network settings entered above after the Gateway has reset you may
need to undo network changes on the PC, remove the cross-over Ethernet cable and
connect both the PC and Gateway to the LAN.