User Manual

Setup of First Administrator
As shipped, the Gateway has no users configured except for a special “one-time-use”
installation user which enables an installer to add the main Administrator to the Gateway.
Thereafter this Administrator’s username is used to perform all subsequent commissioning.
1. At the Gateway user login screen, type the Username “comark” and click Enter
2. At the password screen enter “42”
3. You will be logged into the Gateway as the installation user
4. The Gateway will inform you that “You are about to commission a new system”
5. Click on the “Enter Administrator” Details button
6. When the Add 1st Administrator screen appears fill in the fields with the Username and
Password of your choice
7. In the top left box, marked “Password Required”, enter the installation password:”42” and
then click the Submit button
8. If successful the Gateway will return the message “New user added”
9. Click the OK button to return to the Gateway user login screen
10. Login as the new Administrator you just created
Gateway Language
The language the Gateway uses in web pages and in emails can be changed as follows:
Click the Administration button then the Language button.
Click the radio button below the flag corresponding with your choice of language. Enter your
password and click the Submit button.
The language selected is used immediately for all web pages and emails generated for all
users. There is no need to reset the Gateway or Login again.
Gateway Name
A Gateway name is required for email operation.
Click the Administration button then the Gateway Name button.
The Gateway Name is any name you choose for the Gateway and will be used in the “From:”
field in email and SMS notifications. This is important if you have more than one Gateway in
your wireless system and all should be unique.
i