Operating Instructions and Installation Instructions

CSB200 Class B AIS

R2.0 31

LED Status Indicators

Power Status Timeout Error TX

Off

TX RX Indicates

9 9

Blinking Blinking Normal

9 9

Fixed No MMSI

Blinking No GPS

Blinking Tx off Switch

9 9

Blinking SRM switch

The table above is a quick reference check on the operational status of

the CSB200, for more detailed information it is recommended to view the

Diagnostics page in the proAIS program.

Built in Integrity Test

The CSB200 is equipped with Built In Integrity Testing (BIIT). BIIT tests

run continuously or at appropriate intervals simultaneously with the

standard functions of the equipment. The BIIT detects any failure or

malfunction that will significantly reduce integrity or stop operation of the

CSB200 unit.

The tests include:

• AIS TX malfunction (synthesiser not locked and TX time-out not

exceeded)

• Antenna VSWR exceeds limit

CSB200 Class B AIS

R2.0 32

• Rx channel 1 malfunction (synthesiser not locked)

• Rx channel 2 malfunction (synthesiser not locked)

• Internal GNSS not in use

• No valid SOG information

• No valid COG information

• Background noise > -77dBm

• GPS failure

• VSWR exceeding the maximum allowed level

• The input voltage is out of the specified range

MAINTENANCE

WARNING: Unauthorized opening of the CSB200 unit will invalidate the

warranty.

CAUTION: Avoid using chemical solvents to clean the CBS200, solvents

may damage the case material.

NOTE: The CSB200 contains no serviceable parts. Contact your local

Dealer if the unit fails to function correctly.