Technical data

MAINTENANCE PROCEDURES

WARNING

ATTENTION! Before any adjustment and/or maintenance

procedure always switch off the machine.

ATTENTION! Disconnect the battery before starting any

cleaning or maintenance procedure on the machine.

CLEANING THE FILTER

Once a week proceed with the cleaning of the filter operating as follows:

1. Switch off the machine

2. Remove the debris hopper

3. Disconnect the connector of the filter shaker (1)

4. Slightly loosen the 4 knobs (2)

5. Pull out the filter from its place (3)

ATTENTION: This operations must be done using gloves for

hand protection from the contact with dangerous elements.

3. Carefully clean the filter using a vacuum cleaner or if a vacuum is not

available gently shake the filter manually (not use liquids).

4. Reassemble all parts following the above operations in reverse.

1 2 3