User manual

39
AT THE END OF THE WORK
13. Release the clamp (7) and pull on the handle (8) to remove the debris hopper; place it on the
ground, then take it to the appropriate disposal point and empty it
WARNING: This operation must be carried out using gloves to protect against
contact with dangerous solutions.
14. Insert the debris hopper in the machine, and lock it in place by means of the clamp (7)
15. Raise the seat mounting plate and connect the electric system connector to the battery connector
(for battery versions) or to the generator connector (for versions with a combustion engine)
16. Sit on the driver’s seat
17. Insert the key in the main switch block, and switch on the machine
18. Disengage the parking brake
19. Park the machine in a closed place, in an area where it cannot cause damage to people or other
property, but also be protected from an accidental fall of objects
20. Engage the parking brake
21. Turn the ignition key a quarter turn anticlockwise (position "0") and remove the key
22. Raise the seat mounting plate and disconnect the electric system connector from the battery
connector (for battery versions) or from the generator connector (for versions with a combustion
engine)
WARNING: Do not leave the machine unattended without first removing the
start-up switch key and applying the parking brake. In addition, do not park the
machine in open places or on sloping floors.
WARNING: For machine versions with a combustion engine powered with LPG,
when parking the machine remember to close the cylinder tap (1).
7
8
1