User`s guide

Kernel/Object View Debugger
Instrumentation 3-31
❏ Target. The Target field indicates the target processor and whether it is
an emulator or simulator.
❏ Time. This is the current value of the clock that is used for timer functions
and alarms for tasks. The clock is set up during configuration (PRD_clk)
in CLK - Clock Manager. This is only used when tasks are enabled in the
Task Manager (TSK). When tasks are disabled, the time field remains
zero.
❏ System Stack. The four boxes on the right edge indicate system stack
information.
❏ Tasks Blocked with Timers Running. This list contains all tasks that
are currently blocked and have timers running. The timers are used to
unblock the tasks in the case that they are not made ready by any other
means. The tasks are unblocked with a semaphore, a message in a
mailbox and so on.
3.5.2 Tasks
The tasks page (select the tab labeled TSK) shows all task information as
illustrated in Figure 3-17.
Figure 3-17. The Task Page Dialog Box
The task page fields and other information are as follows:
❏ Task(s). The value in this field indicates the number of tasks present in
the currently operating system. The number of lines of information in the
main information field is equal to the value in this field.