Specifications

About This Manual
The Digital EtherWORKS 3 Turbo boards are personal computer (PC)
adapter boards that enable you to integrate IBM compatible PCs to
local area network (LAN) environments that use IEEE 802.3 and
Ethernet protocols.
This manual explains how to install and configure the Digital
EtherWORKS 3 Turbo boards (also referred to as Turbo board(s) or
board in this manual).
The three Turbo boards and their connectors are as follows:
• Turbo–10BASE2 (ThinWire connector)
• Turbo TP–10BASE-T (twisted-pair connector)
• Turbo PLUS–10BASE-T, 10BASE2, and 10BASE5 (ThinWire,
twisted-pair, and AUI thick wire connectors)
To install the Turbo boards, you need to understand the basic
concepts and uses of Ethernet networks and be familiar with personal
computers.
vii