Specifications

Table A–2 (Cont.) Error Messages
Message Recommended Actions
IRQ test failed
ICR, Interrupt Enable test failed
ICR (TNE, RNE, TXD, or RXD)
Mask test failed
Ensure network configuration file
settings match settings of Turbo
board. Use NICSETUP to view the
board settings.
Refer to the Turbo board distribution
diskette file A:\Error.txt for more
information and troubleshooting
tips regarding the diagnostic error
message.
Ensure there is no IRQ conflict (that
occurs when two devices want to
use the same interrupt line). Try
to hardstrap the board and use
NICSETUP to program the board
to use another IRQ line.
(continued on next page)
A–7