Specifications

Table A–1 (Cont.) Fault Isolation By Symptom
Symptom Possible Cause Recommended Action
The Ethernet address is not
registered for this address
node.
Register the Turbo
board with the remote
boot server. If the
problem persists,
contact your system
administrator.
The system
is on and
displays Digital
EtherWORKS 3
and a self-test error
message during
system startup.
A possible problem exists
with the Turbo board or the
software is not installed
correctly.
Refer to the Turbo board
distribution diskette
file A:\Error.txt for
more information and
troubleshooting tips
regarding the diagnostic
error message.
Replace or reinsert
the Turbo board and
try starting the system
again.
A–5