Specifications

ODI Server Device Driver Installation

To install the ODI server device driver:

1. On the server, change your current directory to where the ﬁle

SERVER.EXE resides. (NetWare is used as an example.)

C:\> CD NETWARE

2. Copy the necessary ﬁles from the distribution diskette into this

directory.

C:\NETWARE> COPY A:\ODI\SERVER\*.*

3. Access the NetWARE server software.

C:\NETWARE> SERVER

4. At the prompt (:), install the device driver.

LOAD C:\NETWARE\EWRK3

5. After answering the conﬁguration questions, bind the driver to the

protocol stack. (IPX is used in this example.)

BIND IPX EWRK3

Network Number: <Your choice>

Note

When answering the conﬁguration questions, your responses

must match the settings selected during the NICSETUP

process.

4–7