Specifications

ODI Client Device Driver Installation
The EWRK3.COM device driver file is used in conjunction with the
LSL.COM, IPXODI.COM, and NETX.COM files that are provided on
the NetWare DOS/ODI service diskette.
If this is a first-time installation, check with your NetWare system
manager to ensure that your PC has been properly configured as a
NetWare client.
To install the ODI client device driver:
1. Create a subdirectory from which to execute the client driver.
Copy the files located in the directory A:\ODI\CLIENT from the
EWRK3 distribution diskette into this subdirectory and set the
default to this directory. (The following assumes the root directory
of the C:\> disk drive is being used.)
C:\> MD NETWARE
C:\> CD NETWARE
2. Copy the necessary files from the EWRK3 distribution diskette to
the login directory:
C:\NETWARE> COPY A:\ODI\CLIENT\*.*
3. The EWRKS3 ODI driver installation is complete. Reboot the
system.
4–6