Specifications

2. When prompted for the network adapter type, select the

Other

NDIS

option.

Note

PATHWORKS, version 5.0 or greater, includes a menu option

to allow selection of the EtherWORKS 3 Turbo board in

NETSETUP. For those versions, the selection of Other NDIS

is inappropriate.

3. When prompted for the full pathname of the NDIS driver,

enter the following:

A:\NDIS\DOS\EWRK3.DOS

4. When prompted for the full pathname of the PROTOCOL.INI

stub ﬁle, enter the following:

A:\NDIS\DOS\PATHWRKS

5. If the CONFIG.SYS ﬁle is not updated automatically, edit the

ﬁle to install the PROTMAN.SYS and EWRK3.DOS device

drivers as follows:

DEVICE=C:\PROTMAN.SYS

DEVICE=C:\EWRK3.DOS

6. The EtherWORKS 3 NDIS driver installation is complete.

Reboot the system.

4–4