Specifications

2. When prompted for the network adapter type, select the Other
NDIS option.
Note
PATHWORKS, version 5.0 or greater, includes a menu option
to allow selection of the EtherWORKS 3 Turbo board in
NETSETUP. For those versions, the selection of Other NDIS
is inappropriate.
3. When prompted for the full pathname of the NDIS driver,
enter the following:
A:\NDIS\DOS\EWRK3.DOS
4. When prompted for the full pathname of the PROTOCOL.INI
stub file, enter the following:
A:\NDIS\DOS\PATHWRKS
NETSETUP will display the configuration parameters read
from the PROTOCOL.INI file. Make sure the parameters
match those of the Turbo board configuration. By default, the
parameters will match those of the Turbo board unless you
changed a setting in NICSETUP.
5. The EtherWORKS 3 NDIS driver installation is complete.
Reboot the system.
NETSETUP will update your CONFIG.SYS, AUTOEXEC.BAT,
PROTOCOL.INI, and network-specific files automatically.
• To install the NDIS-DOS device driver in a non-PATHWORKS
environment:
1. Insert the distribution diskette into the disk drive (for
example, drive A) and copy the following file to your network
directory:
COPY A:\NDIS\DOS\EWRK3.DOS
4–3