User`s guide

Diagnostics 17
Otherwise, it will display a warning sign on top of the USB symbol (Figure 20). Make
sure the USB symbol represents the DOXport 1110 and not another USB device.
If the warning sign is displayed, there might have been an error during the
installation. Reboot the computer and check the device status again after reboot.
— Click START -> SHUT DOWN -> RESTART
— Click START -> SETTINGS -> CONTROL PANEL, then double
click the SYSTEM icon.
If the driver still has the warning after rebooting, remove it and reinstall it again.
— Click REMOVE and select ‘Remove from all configurations (Figure
21).
— Click OK and unplug the USB cable from the computer.
— Click REFRESH and make sure the warning USB symbol has been
removed.
Figure 20.
USB Device with Warning Symbol