User`s guide

12 DOXport 1110 User’s Guide
11. Click on OBTAIN AN IP ADDRESS AUTOMATICALLY.
12. Click OK to accept the TCP/IP settings.
13. Click OK to close the NETWORK window.
14. Click OK when a prompt to restart your computer is displayed, and then click
OK again.
Verifying Your IP Address
The following instructions are for Windows 98. If you are using a different operating system,
refer to the user guide for that system. To check the IP address:
1. On the Windows desktop, click START.
2. Select RUN.
3. Type winipcfg.exe. A window similar to the example in Figure 17 appears.
4. Select your adapter name.
5. Click Renew.
6. Click OK after the system displays the IP address.
If, after performing this procedure, your computer doesn't access the Internet, verify that
PWR, LAN, and CBL LEDs are steady green. Then call your Service Provider. They will
assist in verifying your configuration.
Figure 17.
Verifying IP Address