User`s guide

Introduction 1
Introduction
Your DOXport 1110 Cable Modem
Your DOXport 1110 cable modem gives you high-speed, always on access to the Internet
through your cable TV (CATV) network. The DOXport 1110 works on any cable system that
complies with the Data Over Cable Services Interface Specifications (DOCSIS).
Package Contents
Check the contents of the package. It should contain the items shown in Figure 1.
Please contact the place of purchase if any of the above listed items are missing or damaged. If
your cable modem was obtained directly from your cable operator, it may have been bulk
packaged without the cables, setup sheet, and user’s guide.
Before You Start
Before you install your DOXport 1110, you need the following items. These items are not
supplied with the DOXport 1110.
1. DOCSIS cable modem service from your local service provider
2. CATV (cable TV) outlet
3. Two-way CATV splitter
4. Two RG6 coaxial cables; one cable connects the CATV outlet to the 2-way
splitter and the other cable connects one output of the splitter to your cable
modem
5. Computer with 10 Base-T Ethernet LAN port OR computer with functional
USB port running Windows 98/Me/2000
6. TCP/IP protocol stack
Figure 1.
Package Contents
DOXport 1110
Modem
with Stand
Setup
Sheet
CD-ROM
USB Cable
User's Guide
AC
Adapter
Ethernet
Cable
A00247