Operator`s manual

3.0 OPERATIONS AND CONTROLS
3.1 INSPECTING THE VEHICLE
Upon receipt of vehicle, perform a pre-delivery inspection of the vehicle. Also, before using the vehicle,
there are checks that must be performed to ensure that it is in safe proper working order.
NOTICE: Vehicle should be inspected immediately after delivery. Use the following guidelines
to make sure there are no obvious problems.
Examine the contents of all packages and accessories that may have come in separate packages with
this vehicle. Make sure everything listed on the packing slip is there. Items should not be broken or
damaged.
Examine any visible wiring for obvious signs of damage. Check that all connections are secure. Check
that battery connections are tight and all cells are filled to above plates. Check for damaged or leaking
batteries.
Inspect the tires for obvious wear or damage. Check for proper tire inflation. Refer to manufactures
recommendation imprinted on tire sidewall. Make sure that all wheel lugs are secure.
Check the body and other parts for obvious damage. Look for body damage, jagged edges etc. that may
cause personal injury.
Operate each of the following controls before turning on the power keyswitch.
 Foot Treadle
 Steering Handle Bar
NOTICE: Each control should operate smoothly and easily without sticking or requiring
excessive effort.
Check that the horn sounds and that the key can only be removed when keyswitch is in the “OFF”
position.
3.2 WHAT TO DO IF YOU HAVE A PROBLEM
If vehicle has just been delivered, report any physical damage or missing items to the shipping company
and your local Columbia Dealer.
Report any service issue problems to the individual(s) responsible for correction and/or repair or contact
your local Columbia Dealer for service.
If any problems are found, Do not operate vehicle until repairs are made. Failure to make
necessary repairs could result in fire, severe personal injury, property damage or death.
Consult your local Columbia Dealer for professional service.
3-1