Product Brochure

Specifications
2 ply construction: Rotary peeled tropical
hardwood back. Thin veneer face.
3 ply construction: Rotary peeled tropical
hardwood outer plies. Thin veneer inner
ply. No face or back.
Thickness: 1/8”, 1/4”, 3/8”, 3mm, 5mm,
8mm, 16mm or contact us for other sizes.
Panel size: 4’ x 8’ Long grain or
8’ x 4’ Cross grain.
Minimum radius: 12” may be able to flex
smaller, but will require significant force.
All component parts should be manually
“flexed” to achieve maximum flexibility.
Sanding: Panels may require site sanding.
Applications: Use for curved applications
which will be covered with laminate,
paper-backed veneers or other thick
surfaces. Panels are not designed for
structural or exterior use.
Formaldehyde-free: Made with soy-based
PureBond® technology.
4' x 8' Long Grain Column Bend
GRAIN DIRECTION
4'
8'
2 PLY 4’x8’
3 PLY 4’x8’
3 PLY 8’x4’
2 PLY 8’x4’
p= Core Veneer • o= Thin Veneer
GRAIN DIRECTION
4'
8'
8' x 4' Cross Grain Barrel Bend
(1/4" 3 ply product shown here)
Columbia Radius,
shaping your ideas.
Columbia Radius™ bending plywood is the
versatile panel for many design applications
where straight lines just won’t do.
The amazing flexibility of Columbia Radius
panels makes it a great solution for:
 •Rounded furniture designs
 •Curved cabinet ends or islands
 •Reception and oce work stations
 •Arches and arched casings
 •Rounded wall units and columns
Due to material availability and mill capability,
Columbia Radius may be oered in slightly
dierent specifications in particular regions.
Please check with your local Columbia
representative to confirm the product
oering in your area.
cfpwood.com
Eastern US
1 800-237-2428
Central US
1 800-760-3341
Northeastern US & Canada
1 888-664-1964 • 1 888-525-1964
Western US / Canada
1 800-547-1791
GVS 5M 1/14
453
For more information on Columbia Radius or other products, please call
one of the regional numbers listed below or visit www.cfpwood.com.
Copyright © Columbia Forest Products. All Rights Reserved.
CFP079_Radius_Product_Sheet 2 12/30/13 9:36 AM