Specification

cfpwood.com
Eastern US
1 800-237-2428
Central US
1 800-760-3341
Northeastern US & Canada
1 888-664-1964 • 1 888-525-1964
Western US / Canada
1 800-547-1791
12/13
113
Features & Benefits
Beaded groove pattern creates the
character and unique appearance of
tongue and groove construction.
Plywood panel construction is less time
consuming and costly to install, creating
the look of tongue and groove from a single
sheet of plywood.
Decorative hardwood veneer surfaces allow
users to specify any species Columbia
manufactures, giving designers and specifiers
an abundant variety of natural wood grain
and color patterns.
It’s wood. Warm to the touch, wood is a more
welcoming material than laminate surfaces.
PureBond® Beaded Panels. To specify
formaldehyde-free core, request PureBond®
Beaded Panels which are constructed with no
added urea-formaldehyde (NAUF) MDF.
Additional charges or lead times may apply.
Specifications
Species: Oak, maple, birch, cherry and other
species quoted on request.
Grade: ANSI HP-1-2000 B face or better is
recommended for best results.
Grain Direction: Available with grain running
lengthwise. Counterfront, where grain runs
widthwise, is not available.
Thickness: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
Typical production thicknesses
are 1/4” and 3/4”.
Length: Available 72” to 120”. Panels can
be ordered oversize which adds another
1/2” to the length.
Width: Available in 4’ width.
Bead Patterns: 1 1/2” OC or 3” OC.
Core: MDF substrate provides superior
results across all thicknesses. Imported veneer
core is available for 1/4” thickness but does not
groove as precisely as the MDF product, as it
has a higher degree of thickness and color
variation that can cause variation in the
appearance of either the groove or the bead.
Order Information: Panels graded before
machining. All material beaded is processed on
the beading machine as run of the mill. Buyer
agrees to take all shop and beaded downfall
developing. Press load minimums apply.
Columbia’s Beaded Panels feature a wide variety of decorative
hardwood faces and backs machined with a 1 1/2"or 3" on-center
beaded groove pattern. The cutting heads are calibrated to ensure
pattern uniformity across the entire sheet for a convincing illusion of
tongue and groove woodwork that matches any existing species used.
And since Beaded Panels are unfinished, close color matching with
existing molding and millwork is possible. You can finish them or use
them in painted applications.
For more information, please call one of the regional numbers
listed or visit www.cfpwood.com.
Good looks and installation
ease are just the beginning.
Copyright © Columbia Forest Products. All Rights Reserved.
CFP069_Beaded_Panel_Product_Sheet.indd 2 12/19/13 12:09 PM