Installation Guide

How To Install Columbia Forest

Products Beaded Panels

Step 1: Prepare the Panels

Step 2: Trim Along the Beaded Profile

Gather the necessary Columbia Forest Products Beaded Panels for installation. To

ensure you have the correct number of panels, measure your space prior to purchase.

Ensure that each panel is properly sized for the area where you intend to install them.

Begin by trimming along the beaded profile of the first panel to match the 1.5” spacing

required.

PAGE 1
How To Install Columbia Forest Products Beaded Panels Step 1: Prepare the Panels Gather the necessary Columbia Forest Products Beaded Panels for installation. To ensure you have the correct number of panels, measure your space prior to purchase. Ensure that each panel is properly sized for the area where you intend to install them. Step 2: Trim Along the Beaded Profile Begin by trimming along the beaded profile of the first panel to match the 1.5” spacing required.
PAGE 2
Use appropriate tools, such as a saw, to achieve the desired trim. Step 3: Trim the Next Panel Proceed to the next panel and trim it at the profile to ensure it matches the 1.5” spacing requirement. Take care to make precise cuts to maintain consistency. Step 4: Align the Panels Align the trimmed panels on the designated wall or cabinet surface. Ensure they fit snugly and are positioned correctly before proceeding.
PAGE 3
Double-check the alignment and spacing of each panel to ensure a uniform and professional finish. Make any necessary adjustments before finalizing the installation. Step 7: Completion Once all panels are installed and aligned correctly, step back and admire your work. Enjoy the enhanced aesthetic appeal and functionality provided by Columbia Forest Products Beaded Panels in your space.